TEL 15-2413N-HS

DC/DC Converter TEL 15WIN-HS Series, 15 Watt • Ultra compact 15 Watt converter in DIP-16 metal casing • Special heatsink-case design for maximized temperature capabilities • Operating temperature range -40°C to +70°C without derating • Wide 4:1 input voltage ranges: 9-36, 18-75 VDC • High efficiency (up to 87%) for low thermal loss • 6-side shielded metal case with insulated baseplate • Built-In EN 55032 class A filter (conducted) • • Protection against short circuit UL 62368-1 IEC 62368-1 3-year product warranty The TEL 15WIN-HS is a series of isolated 15 Watt converters which come in an ultra compact DIP-16 metal package with a special heatsink-case design for extended temperature capabilities. The design purpose of this series was to maximize temperature capabilities within the standard DIP-16 footprint. The TEL 15WIN-HS offers a wide 4:1 input voltage range and features a high efficiency of up to 87% which together with the integrated heatsink casing enables an operation temperature of up to +70°C at full load and up to 85°C with 50% load. The converters also have an internal input filter to comply with conducted emission standard EN 55032 class A. It's an economical solution for space critical and cost sensitive applications in instrumentation, IT and industrial electronics where operating temperature range is critical factor. Models Order Code Input Voltage Range TEL 15-2411WIN-HS TEL 15-2412WIN-HS TEL 15-2413WIN-HS TEL 15-2415WIN-HS TEL 15-2422WIN-HS TEL 15-2423WIN-HS TEL 15-4811WIN-HS TEL 15-4812WIN-HS TEL 15-4813WIN-HS TEL 15-4815WIN-HS TEL 15-4822WIN-HS TEL 15-4823WIN-HS Note 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 5.1 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 5.1 VDC 12 VDC 15 VDC 24 VDC +12 VDC +15 VDC 2'940 mA 1'250 mA 1'000 mA 625 mA 625 mA 500 mA 2'940 mA 1'250 mA 1'000 mA 625 mA 625 mA 500 mA Vnom Efficiency Imax –12 VDC –15 VDC -625 mA -500 mA –12 VDC –15 VDC -625 mA -500 mA typ. 86 % 87 % 87 % 87 % 87 % 87 % 86 % 87 % 87 % 87 % 87 % 87 % - 48 Vin models: If the input will be switched electromechanically, use an external 27 μF / 200 V / KXY capacitor to reduce voltage transient. www.tracopower.com September 20, 2023 Page 1 / 4 TEL 15WIN-HS Series, 15 Watt Input Specifications Input Current - At no load 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: - At full load Surge Voltage Input Inrush Current Under Voltage Lockout 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: Recommended Input Fuse Input Filter 10 mA typ. 7 mA typ. 720 mA typ. 360 mA typ. 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 36.6 A typ. (24 Vin models) 34.2 A typ. (48 Vin models) 8 VDC typ. 16 VDC typ. 3'000 mA (slow blow) 1'500 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise Capacitive Load - Voltage Balance (symmetrical load) - Cross Regulation (25% / 100% asym. load) - 20 MHz Bandwidth - single output - dual output ±1% max. 0.8% max. 0.8% max. 1% max. 1% max. (Output 1) 1% max. (Output 2) dual output models: 2% max. single output models: dual output models: single output models: dual output models: dual output models: 5% max. 5.1 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation Transient Response - Response Deviation - Response Time 70 mVp-p typ. (w/ 2.2 μF / 50 V MLCC) 1'800 µF max. 820 µF max. 820 µF max. 270 µF max. 560 / 560 µF max. 270 / 270 µF max. Not required ±0.02 %/K max. 40 ms max. Continuous, Automatic recovery (Hiccup Mode, Automatic Recovery) 110% min. of Iout max. 160% typ. of Iout max. 3% typ. / 5% max. (75% to 100% Load Step) 500 µs max. (75% to 100% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category EN 62368-1 IEC 62368-1 UL 62368-1 www.tracopower.com/overview/tel15win-hs PD 3 Not mains connected All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TEL 15WIN-HS Series, 15 Watt EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions External filter proposal: EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge External filter proposal: - Conducted RF Disturbances - PF Magnetic Field Continuous: EN 55032 class A (internal filter) EN 55032 class B (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/tel15win-hs EN 55024 (IT Equipment) EN 55035 (Multimedia) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 20 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV, perf. criteria A www.tracopower.com/overview/tel15win-hs EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 30 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Environment - Operating Temperature - Case Temperature - Storage Temperature - High Temperature - Input to Output, 60 s - Input to Output, 1 s - Input to Case, 60 s - Output to Case, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF - Vibration - Mechanical Shock - Thermal Shock Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Thermal Impedance 95% max. (non condensing) –40°C to +85°C +110°C max. –50°C to +125°C 1 %/K above 70°C (average) See application note: www.tracopower.com/overview/tel15win-hs Natural convection (20 LFM) 6'000 m max. 420 - 540 kHz (PWM) Functional Insulation 1'500 VDC 1'800 VDC 1'000 VDC 1'000 VDC 1'000 MΩ min. 2'200 pF max. 2'000'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf 2.4 g, 3 axis, random waveform, 30 min 30 g, 3 axis, half sine, 11 ms IPC-9592B Aluminum Silicone (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2 - 4 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount THD (Through-Hole Device) DIP16 Lead-Free Wave Soldering 260°C / 10 s max. 14.2 g 18.4 K/W typ. - Case to Ambient All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TEL 15WIN-HS Series, 15 Watt Environmental Compliance - REACH Declaration www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 9b701a28-fe81-43bc-8f8f-7da7a687c7a0 - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tel15win-hs Outline Dimensions 24.4 (0.96) 3.8 14.3 (0.56) (0.15) 10.16 (0.400) Pinout 2.1 (0.08) Pin Single 9 (0.100) 8 2.54 1 NC Common 9 +Vout 10 out 16 +Vin NC: Not connected 16 3.3 1 24.4 (0.96) BOTTOM VIEW in (0.13) Ø0.5 (Ø0.02) 15.24 (0.600) 10 8 Dual Dimensions in mm (inch) Tolerances: X.X ±0.5 (X.XX ±0.02) X.XX ±0.25 (X.XXX ±0.01) Pin diameter tolerances: X.X ±0.05 (X.XX ±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4